BYD ETP3 RACKING FOR PLUMBERS

Syncro System designs and installs fully customised racking solutions for all trades and professions, but plumbers are certainly among those who come to Syncro workshops most frequently.

Though all plumbers have certain requirements in common, every racking system we install is unique. We stand out for our ability to respond in a totally personal way to all requests. After all, even if our customers work in the same trade, they may specialise in different aspects, live in different climates, focus on certain types of job, and follow different procedures. In fact, there are thousands of variables.

Here's the racking system we installed for a plumber who chose a BYD ETP3.

The vehicle in the photo above is a BYD ETP3.

Use: The van is owned by a plumber who installs and services heating and air conditioning systems.

Dimensions: The BYD ETP3 belongs to the small-medium compact category, with a cargo volume of 3.5 m³.

Engine: The BYD is full electric, making it particularly suitable for urban use or areas with traffic restrictions.

Configuration: The van has two sliding side doors. Racking has been installed on both side walls, while the bulkhead has been fitted with cargo lashing accessories.

Let's take a closer look at the details.

Syncro System's racking technicians always start by installing liners, as these are essential for protecting the bodywork against dents, scratches and damp, and also provide stable support for racking and accessories.

In this case, however, the lining stage was skipped because the BYD ETP3 came to us with an aluminium tread-plate floor liner already fitted at the time of purchase.

Browse Syncro floor liners and panelling.

The left side of the BYD ETP3 is fitted with racking that reaches almost up to the roof, its length limited by the sliding door.

The floor-level compartment around the wheel arch is partially enclosed by a patented lift-and-rotate door. Further up are three shelves with raised rear panels, non-slip mats and internal space dividers.

Accessories: Six plastic and metal hooks have been fixed to the rear-facing side panel.

The right side of the BYD ETP3 also has a sliding door; the racking is identical to the opposite side, with a partly enclosed floor-level compartment and three shelves.

At the bottom of the BYD ETP3's bulkhead, Syncro has installed a Syncroblock bar with hooks and a lashing strap, used to secure bulkier loads that don't fit in the floor-level compartments, drawers or shelves, and that can be loaded through the sliding side doors. Syncro technicians have also added two aluminium cable holders.

Are you a plumber? See how other plumbers have fitted out their vans.

Is your job a “special” one? Syncro can find the perfect solution for the most unusual requirements.

We are the van racking specialists. We’ve been making and installing racking since 1996 and in the last thirty years have delivered over 100,000 van racking systems.

Contact us now to arrange an obligation-free consultation! Why? To work better, save time and improve your professional image!