Syncro offers three types of milled aluminium rail for use with cargo bars, rings and lashing straps with buckle or ratchet tensioner.

This 75 mm milled plate can be fixed to racking or bodywork anywhere in the van.

Milled rails code AAT00007 are specially designed to be fitted to the front or side of Ultra side panels using the holes already present.

Special square-head screws engage in the groove in the rear of the rail.

Certain types of profile have holes of the same shape as those in milled rails. These can be used to attach rings and straps directly to the profiles and hold cargo firmly against the racking.

Straps with hooks are ideal for securing cargo in your van’s load compartment. You can use them with your van’s original anchor rings, or you can fit Syncro anchor rings as needed. Syncro rings can be fixed virtually anywhere inside the van, to the floor, walls, racking, or to milled aluminium rails.

Swivel rings can be fitted anywhere inside the cargo compartment and used to lash cargo in place with ropes, bungees or straps.

These racks are a great way to carry spray cans and bottles where they are always handy. The four models of spray can and bottle rack in the Syncro catalogue are made entirely from powder-painted aluminium and can hold three or four spray cans of 65 mm in diameter, or two or three bottles of 85 mm in diameter. These racks can be installed on the sides of racking, on the van’s body or on an interior liner.  No more cans or bottles rolling around inside the van and disappearing when you need them! With these racks from Syncro System, your spray cans and bottles are always ready for use.

Syncro cable holders are made from cast aluminium with a powder paint finish for light weight and strength. They come in 3 different sizes. Modern, attractive design!

These steel hooks are adjustable in length from 140 to 190 mm.

All-aluminium construction for minimum weight. Available in 3 sizes. Can be fixed to interior liners or to racking. Ideal for carrying probes, extension leads, etc..

Thanks to the latest modifications, these hooks and clips, in plastic and steel or plastic only, can be fitted directly to the holes in Ultra side panels, to old-style Syncro racking using special adapter panels, and to perforated versions of bodywork liners.

Syncro’s adjustable brackets can hold a wide range of fire extinguishers. Once the bracket is adjusted to the right size, the extinguisher is held in place by a strong strap with buckle.

A quick and effective way to secure motorcycles for transport inside your van. These Syncro bike clamps incorporate a practical and ultra-rapid automatic locking system. Simply push the bike in and the clamp closes; pull it out again and the clamp opens again. The bike remains upright even without its stand and can therefore be loaded into the van by one person without assistance. To secure the bike rigidly for transport, two straps with ratchet tensioners should be used.

The BAR RACK KIT includes a metal pocket with 3 internal compartments, for installation on the floor. The top section of the kit consists of either an aluminium slider bar with plastic clips or a steel bracket with a strap. Bar racks are ideal for carrying bars, rods, crowbars and similar long items.

A practical way to carry documents, tools and small parts. A robust plastic frame holds a fibre net with elastic across the top. Can be fixed to the racking or to the van’s bodywork or liners. Comes in two widths: 302 and 325 mm.

A rack for up to nine silicone cartridges, complete with nozzle holes. Silicone cartridges are held at an angle so that nozzles can remain attached if required. Made from powder-coated aluminium. Can be fixed to the van’s bodywork or to the racking. Aluminium construction for reduced weight. Intelligent sloping design with cartridges in two rows for more efficient use of space.

Steel and elastic snap fasteners for holding tools and materials in place. Available with two lengths of elastic.

The Syncro laptop stand lets you secure a laptop computer to the passenger seat, where it is easily accessible at any moment thanks to a practical and secure fixing system. The stand fixes firmly to the frame of the passenger seat but can be removed without tools at any time. Made entirely from lightweight but strong aluminium, the stand can be adjusted to the most suitable height and angle simply by loosening the locking knobs. Universal computer mounting with two strips of Velcro.

The Syncro cab organiser attaches to the passenger seat using just the seat belt and a clamp that fits under the headrest. Two generous backrest pockets provide plenty of storage space for price lists, maps and brochures. The mobile phone pocket can be fixed in any of four places and the practical clip board is ideal for holding a note pad and pen. A hole in the writing board provides practical storage for plastic bottles. The blue box can be detached at any time, as indeed can the entire organizer, which only takes a minute to fit and remove.